DSA200SCEMTEG
🕑 Reorder from Previous Order?
🕑 Use Our Quick Order Pad

DiscountStrutAccessories.com Logo

0

Secure Checkout

DiscountStrutAccessories.com Logo

Product Search
    🕑 Reorder from Previous Order?
    🕑 Use Our Quick Order Pad
    855-931-0002

    Secure Checkout
    2" Thin Wall Conduit Clamp (E.M.T)

    Thumbnail Filmstrip of 2" Thin Wall Conduit Clamp (E.M.T) Images

      Purchase 2" Thin Wall Conduit Clamp (E.M.T)

      SKU: DSA200SCEMTEG
      2" Thin Wall Conduit Clamp (E.M.T)

      $1.32 /per piece

      Please select a qty in increments of 50.

       




      WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

      Secure EMT to struts or channels using Discount Strut Accessories 2" Thin Wall Conduit Clamps. Has an allowable load of 800Lbs. Each clamp consists of 2 halves, 1 kept nut & 1 slotted hex head cap screw.

      • Product Code DSA200SCEMTEG
      • Product Finish: EG


      Thin Wall Conduit Series (E.M.T)

      Part
      No.      		 Nominal
      Size      		 O.D.
      Size      		 Guage Allowable Load
      Lbs. (kN) (ea.)      		 Slotted Indented
      Hex cap Screw
      DSAW6025A 3/8" (10mm) 0.577" 16 400 (1.78 kN) 1/4" x 3/4"
      DSAW6026A 1/2" (13mm) 0.706" 16 1/4" x 3/4"
      DSAW6028A 3/4" (19mm) 0.922" 16 1/4" x 3/4"
      DSAW6030A 1" (25mm) 1.163" 14 600 (2.67 kN) 1/4" x 3/4"
      DSAW6032A 1-1/4" (32mm) 1.510" 14 1/4" x 3/4"
      DSAW6034A 1-1/2" (38mm) 1.740" 12 800 (3.56 kN) 5/16" x 1"
      DSAW6038A 2" (51mm) 2.197" 12 5/16" x 1"
      Each clamp consists of two halves, one kept nut and one slotted hex head cap screw.
      Standard Fitting Dimensions
      WIdth 1-5/8" (41.3 mm)
      Thickness 1/4" (6.3 mm)
      Hole Diameter 9/16" (14.3 mm)
      Hole Spacing On Center 1-7/8" (47.6 mm)
      Hole Spacing From Ends 13/16" (20.6 mm)
      *UNLESS OTHERWISE NOTED*

      provisional