DSAB6030AEG

DiscountStrutAccessories.com Logo


Secure Checkout

DiscountStrutAccessories.com Logo

Product Search
855-931-0002

Secure Checkout
1" Thin Wall Conduit Clamp  (E.M.T)

Thumbnail Filmstrip of 1" Thin Wall Conduit Clamp (E.M.T) Images

    Purchase 1" Thin Wall Conduit Clamp (E.M.T)

    SKU: DSAB6030AEG
    1" Thin Wall Conduit Clamp (E.M.T)

    $0.71 /per piece

    Please select a qty in increments of 100.

     




    WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

    Secure EMT to struts or channels using Discount Strut Accessories 1" Thin Wall Conduit Clamps. Has an allowable load of 600Lbs. Each clamp consists of 2 halves, 1 kept nut & 1 slotted hex head cap screw.

    • Product Code DSAB6030AEG
    • Product Finish: EG


    Thin Wall Conduit Series (E.M.T)

    Part
    No.
    Nominal
    Size
    O.D.
    Size
    Guage Allowable Load
    Lbs. (kN) (ea.)
    Slotted Indented
    Hex cap Screw
    DSAW6025A 3/8" (10mm) 0.577" 16 400 (1.78 kN) 1/4" x 3/4"
    DSAW6026A 1/2" (13mm) 0.706" 16 1/4" x 3/4"
    DSAW6028A 3/4" (19mm) 0.922" 16 1/4" x 3/4"
    DSAW6030A 1" (25mm) 1.163" 14 600 (2.67 kN) 1/4" x 3/4"
    DSAW6032A 1-1/4" (32mm) 1.510" 14 1/4" x 3/4"
    DSAW6034A 1-1/2" (38mm) 1.740" 12 800 (3.56 kN) 5/16" x 1"
    DSAW6038A 2" (51mm) 2.197" 12 5/16" x 1"
    Each clamp consists of two halves, one kept nut and one slotted hex head cap screw.
    Standard Fitting Dimensions
    WIdth 1-5/8" (41.3 mm)
    Thickness 1/4" (6.3 mm)
    Hole Diameter 9/16" (14.3 mm)
    Hole Spacing On Center 1-7/8" (47.6 mm)
    Hole Spacing From Ends 13/16" (20.6 mm)
    *UNLESS OTHERWISE NOTED*

    provisional